Gold Note XS85 exclusive floor-standing loudspeaker NEW


The new exclusive Gold Note floor-standing loudspeaker.
 
FLOOR-STANDING LOUDSPEAKER

3way, Exclusive Modular Reflex design with double aluminium rear port aligned Dual Slope QB3 N°4.

CABINET

Unique Gold Note XS Curved panels ultra rigid modular design. Super dampened case made by reinforced wooden multilayers to control resonances improving sound quality.

The Cabinets are conveniently separated for bass and mid/highs to enhance perfect tuning.  The bass drivers cabinet is vented while the mid/highs is sealed with a second open chamber featuring an aluminium ultra thick grille to improve rigidity reducing internal reflections.

The Cabinets are interfaced each other with 3mm thick aluminium laser shaped layers increasing rigidity and helps module assembling.

The loudspeaker features an integrated massive wooden & steel 2° lean backward stand with hidden adjustable spikes.

TWEETER

28 mm custom ultra linear extra thin and light soft dome neodymium magnet featuring an aluminium big machined dampened rear chamber and hexagon copper conductor coil.
Custom cooling coil radiator with no-oil cotton damping design reduce resonance increasing extension linearity up to 45° out of axis.

MIDRANGES

Two 150mm ultra linear horn loaded super light driver featuring an aluminum elliptical phaser. Nextel treated paper enhancing highest rigidity for fast natural audio response. Featuring adaptive rubber surround provides an ideal match to the cone over the total frequency range.

Extra large magnet system, with very long and light weight CCAW voice coil allowing perfect coil excursion, low distortion having excellent transient response.

Giant copper rings mounted above and below the T-shaped pole piece reduce non linear and modulation distortion and increase overload margin.

Extremely stiff and stable very thick skeleton aluminium/magnesium increase rigidity and lightness while avoiding airflow noise.

WOOFERS

Two 220 mm, ultra linear horn loaded super light driver featuring an aluminum elliptical big phaser. Nextel treated paper enhancing highest rigidity for fast natural audio response. The bass drivers feature large magnet design with a bumped back plate, a large dampened platform on the back of the magnet improves stiffness that features a very long and light weight CCAW voice coil, allow extreme coil excursion with low distortion and excellent transient response.

Giant copper rings mounted above and below the T-shaped pole piece reduce non linear and modulation distortion and increase overload margin.

A chrome plated brass phase plug reduces compression due to temperature variations in the voice coil, increase long term power handling capacity eliminating resonances in the cavity inside the voice coil former.

Extremely stiff and stable very thick skeleton aluminium/magnesium increase rigidity and lightness while avoiding airflow noise.

CROSS-OVER

Passive Crossover Low-High Dual-Slop with cut at 200Hz & 2200Hz featuring a resistive design enables ultra linear load to let amplifier working without stressing its power supply even at a nominal impedance of 4Ω.

Anti-resonance thick glass-fibre board featuring a very sophisticated triple crossover network featuring a summing midrange multi slope design to perfectly integrate the drivers of the Array enabling a close field ultra smooth audio experience.

Air winding hand made coils and super selected audio grade capacitors and resistor completing a deluxe crossover.

FREQUENCY RESPONSE
30 Hz – 30.000 Hz, Dual Slope QB3 N°4

SENSITIVITY
90dB SPL (2.83V/1 m)

NOMINAL IMPEDENCE
4 ohm semi-resistive

POWER HANDLING
30W – 300W

SUGGESTED MIN. LISTEING POINT
1.5/2.0m

DIMENSIONS
1280 x 357 x 665 mm (HxWxD)

WEIGHT
140 Kg per pair – net weight
170 Kg per pair - shipping weight

FINISH
Black lacquer front panel, top, rear panels and stand 
Black Glossy grand Piano lacquer, White lacquer or Italian Walnut side panels