240 W x 140 H x 430 D mm (w/o isolated feet)
• Frequency Response:
+0 /-0.1 dB, 0 to 150 kHz;
+0 / -1 dB, 0 to 500 kHz;
+0 / -3 dB, 0 to 2mhz (values for any level to 5V RMS)
• Connector Complement:
1 x balanced (female XLR) stereo inputs
2 x single-ended (RCA) stereo inputs
1 x balanced (male XLR) stereo main and secondary output
1 x single-ended (RCA) stereo main output
4 x Solo Link port
1 x IEC-standard AC mains connector
• Feedback:
Linear / Standard / Vibrant / Dynamic / ZERO / ONE / FIVE/ TEN
• Slew rate preset:
5 presets in different μs
• Input sensitivity:
Nominal level: 3 V RMS.;
Saturation level: 5V RMS. (max.);
Nominal input impedance: 10 kOhms.
• Output level:
Nominal level: 5 V RMS.;
Maximum output level: 12 V RMS.
• Distortion:
THD < 0.002%
• Circuit speed:
Adjustable for slew rate
• Crosstalk:
> 115 dB between channels (any input to any output, input terminated)
• Noise (Ctd.):
Signal-to noise ratio on line input > 110 dB
• Power Supply:
Nominal line voltage: 117 or 234 V;
Input voltage range: +/- 10 % Maximum power consumption: 75 W
Precision speaker:
• 2 x 5" Woofer + 2 x 1" Tweeter
• size - 550 W x 320 H x 100 D mm; w/ABASE footprint – 550 W x 215 D mm
• weight - 18.5 kg. (with ABASE)
• frequency response - 58 to 30,000Hz at ±1dB (42 to 30,000, -10dB)
• crossover - 12dB/Oct; W: 58-2,000Hz / T:2,000-30,000Hz
• sensitivity - 89dB@1W/1m
Matej Isak
Mono and Stereo ultra high end audio magazine
All rights reserved, October 2011
www.monoandstereo.com
http://www.ologe-acoustic.com/