RT Audio Design Orpheus single-ended class A Power amplifier



Pure A class from Bulgaria


Tsencov from RT Audio Design is preparing the review samples for review at Mono and Stereo. Here are few initial infos:
"This amplifier is designed with zero negative feedback (ZeroNFB), pure Class-A and definitely single-ended. The amplifier is built around the BUZ-900 N-Channel MOSFET

We use Mundorf Mcap SUPREME SILVER / GOLD or AMPOHM WOUND PRODUCTS – FP-CA-10-AU capacitors for the input coupling and a large electrolytic on the output with a 10 µF polyester bypass capacitor. The four 20 watt Mundorf`s amazing M-Resist™ SUPREME or Vishay 30W 1% non-inductive wire-wound resistors act as the load."



Power supply unit


This amplifier is powered with stabilized separate power supply, consisting of 300W transformer, 4 ultra fast shottky diodes MBR4060, low drop voltage regulator LM7824 and high quality electrolytic capacitors (Nichicon). The power is filtered using 40000µF capacitors model NICHICON – LLS1H103MELC

Technical data



Frequency response: 10 Hz – 100 kHz
Input put impedance: 10 kOhm
Output power: 7W continuous avg. output power into 8 Ohm at VCC +27V ( With sensitive speakers > 92 dB )
THD+N:


http://rtaudiodesign.com








Matej Isak. Mono and Stereo ultra high end audio magazine. All rights reserved. 2006-2013. www.monoandstereo.com. ..:: None of the original text, pictures, that were taken by me, links or my original files can be re-printed or used in any way without prior permission! ::..