Aries Cerat Diana Tube Integrated Amplifier NEW

Our long-awaited integrated amplifier,the Diana, is ready to give unsurpassed sonic bliss in a single-though-hefty package.

Using borrowed techniques and circuits from our top-line Monoblocks like the Concero 65,and pre-amp stages like the Pondera Ref,we have come up with what we believe, is the absolute and superlative design in integrated amplifier world. The Diana is a three stage ,all Direct Heated Triode Single Ended amplifier. All three stages are designed as Direct Heated Single Ended amplifier stages. The first two stages are loaded with highest quality bifilar-winded, interstage transformers, no coupling capacitors present in signal path. Input tubes are a pair of high power DHT 814 tubes, driving another 814 pair, which drives a pair of 813 DHT output tubes.

The power supplies are fed by a 800VA and a 1000VA (1800VA total) transformers, controlled by a soft start circuit. The four 814 and two 813 tubes, all have their separate choke filtered PSUs and all 6 filaments are powered by 6 tripled filtered PSUs, to provide solid power reserves, and perfect isolation between all stages.

Output stage power supply ,uses three film Super Capacitors(3kg each,100 times less ESL/ESR than any Electrolytic technology).

Biasing of the input, driver and output tubes is attained via special biasing circuits, and all stages can be fully adjusted and monitored while listening.

Attenuation method is discrete-relay-switched-resistors.

Number of inputs: 5 unbalanced, optional
Balanced input
HT pass-through ready
Gain: 24db
Power Output 25W sine, 50W square
Signal bandwidth :6Hz-100KHz
SNR >110db
Weight: 115kg
Dimensions: 570mmW X 630mmD X 360mmH