The d1-driver is an analog driver. It is usually connected to the output of the DAC. It is an answer to the endless question "is it better with or without preamp?". The strength of preamps is there active stage more than their volume control. The active stage helps driving the power amp. Traditional preamps have been designed when people had several analog sources: LP, cassette, FM tuner, CD player...

Some of us still use LP today and still need a traditional preamp.

Many of us use just a DAC as source. The d1-driver is the solution in this case to get the best sound, the lowest noise and the most friendly volume control from a Totaldac DAC remote. Its drive capability allows the d1-driver to improve the sound of a DAC, improving bass control, articulation, presence, soundstage and life.

It has been tested when connected between a DAC and a power amplifier (transistor or tube), but also between a DAC and an integrated amplifier.

The d1-driver has no volume control because it relies on the DAC volume control.

It has been tested in association with the d1-core up to the d1-direct and d1-twelve DACs with great success.

-voltage gain: 0dB gain (x1 factor) or 10dB gain (x3 factor), chosen on order
-RCA inputs and outputs by default. Balanced XLR are possible when using two d1-driver-XLR in monoblocs configuration
-very high bias current class A design for a natural low output impedance and low distorsion
-very high grade components in the signal path, some of them custom made.
-extreme low noise due to discrete design (no IC at all) and external power supply, matching the noise of d1-twelve DAC
-very easy input impedance: 1MegaOhm
-natural low output impedance plus added 40ohm pure resitor for a perfect interconnect impedance matching
-can drive anything above 300ohm without distorsion
-distorsion: 0.0025%
-frequency cut-off at -0.5dB: 100KHz
-using 0.01% VAR Bulk Metal® Foil resistors from Vishay in critical parts of circuit
-signal ground can be connected to the earth or left floating, to avoid any ground loop noise
-aluminium and PMMA enclosure with massive pure copper antivibration plate
-power consumption 19W
-main box dimensions: height 110mm, width 360mm, depth 290mm
-power supply dimensions: height 65mm, width 122mm, depth 180mm
-weight: 7kg
Available options:
-0dB or 10dB voltage gain.
-two pairs of RCA outputs for a subwoofer or a headphone amplifier or for bi-amping.
-external RCA attenuators with low output impedance, in case your system has too much gain.
-silver massive aluminium front panel.
-balanced configuration, using two d1-driver-XLR (equipped with XLR connectors).
-115V power option.


d1-driver: 5800euros incl VAT in Europe, 5300euros excl VAT out of Europe
special price: for a purchase a d1-direct DAC and a d1-driver: remove 1100euros incl VAT in Europe or 1000euros excl VAT out of Europe