NEW LESSLOSS ECHO’S END REFERENCE SUPREME EDITION


This version of LessLoss Echo's End features dual mono discrete DAC boards as well as dual power supplies as well as 6 onboard Firewall 64X units for a serious upgrade from Echo's End original. There are several more features available for you to see on our Echo's End DAC page, including C-MARC™ internal wiring, carbon fiber transformer housing, and a hand made, polished build made of 100% german Panzerholz using natural Beeswax impregnation oil.

Echo's End Reference Supreme Edition
  • Two separate german Panzerholz enclosures, one for power supply, one to house the DAC process and additional Firewall 64X modules.
  • Two transformers, one for digital input schematic separately.
  • Potting of transformers in LessLoss proprietary high negative ion content epoxy compound.
  • Additional power stabilizer schematics for digital input schematics with 30X dynamic headroom.
  • Two grounded custom hand made carbon fiber transformer shrouds (really lowers the noise floor down to incredible stability at very high frequencies, important for Jitter reduction).
  • Cryogenically treated, solid copper, gold plated power inlet (Sound is smooth and dynamic as a result.)
  • Three separate LessLoss C-MARC™ XLR DC cables based on Triaxial cable, length 1.5m each, to connect the two units.
  • Most precise resistors available (we only ever use the very best ones with the very best specs available).
  • Dual power supplies, dual Soekris boards, reprogrammed by LessLoss for dual mono configuration (this provides amazing stereo separation and a whole lot of nuance in terms of spacial presentation. Everything becomes more 3D and liquid.)
  • XLR output derived from four mono channels of resistor ladders (output buffering schematics completely bypassed. This is possible because one board's Right channel converts the signal in phase and the Left channel converts the same digital signal out-of-phase. The phase reversal is done still in the digital realm, so the balanced signal is digitally perfect, without noise from an output buffer. This provides amazing clarity, transparency; a holographic sound and a super low noise floor.)
  • LessLoss special custom S/PDIF - I2S conversion schematic (developed and manufactured by LessLoss).
  • LessLoss controlled automatic digital input selection.
  • LessLoss unique 3.3V generation for internal I2S (The USB 5V supply is discarded; and the 3.3V is made with our own power stabilizer and Firewall 64X technology. It is super smooth and stable. Makes you forget you are listening to a computer USB source!)
  • All floating bolts point-to-point star grounded, including the housing bolts. This lowers the internal noise reflections and makes it dead silent inside.
  • 14 units integrated Firewall 64X technology. The best we ever made.
  • C-MARC™ internal hook-up wire (All power and analogue signal leads are C-MARC™. This takes a lot of labor to prepare but the results are so organic and natural with great speed but never getting tiring to the ear. Well worth the extra effort.
  • DSD (2x) ready over USB.
  • Plays up to 192 kHz sampling rate PCM data.
  • Hand polished, 100% natural beeswax impregnated (Beautiful, even smells really good, though never overpowering.)
  • Precision engraved brass placard on front of both units, with model name engraved by laser on unit top.
  • Ships in two separate LessLoss branded water-tight flight cases.