TRENNER & FRIEDL PHAROAH SPEAKERS

Trenner & Friedl writes: "After ten successful years, we felt it was now time for us to take the next step with our PHAROAH.  Although almost the same size, the new Pharoah looks more petit than its predecessor due to the slight incline and beveled edges. It perfectly combines engineering with fine craftsmanship. A highly stable housing made of birch plywood is hidden under the finely sanded surface made of hand-picked veneers. Inside, it was stiffened at critical points and houses two chambers of different sizes in order to minimize standing waves."

Due to its special sound alignment, the new Pharaoh can be integrated even better into living spaces. 

With its large 10-inch woofer, there are enough reserves even for huge sound storms. The paper membrane is coated with our special violin varnish delivers a nimbly and natural sound, free of the resonances of synthetic materials. 

The coaxially mounted 1-inch compression driver with a feather-light and high-strength titanium membrane fits seamlessly and well-balanced with the woofer. 

Crystal clear sound with lack of distortions. 

The heart of this speaker is of course the perfectly matched crossover with carefully selected components from Mundorf. 

It is the sensitive conductor of this ensemble, without whom a performance at this high level would not be possible. 

Pharoah plays perfectly balanced and homogeneous, he is like a wiry sprinter. The richness of timbres and the passionate musicality are irresistible. 

It delivers enormous dynamics and powerful bass, but at the same time the finest details are delicately worked out. 

Timeless design meets sophisticated technology 

Features

  • Floor standing speaker
  • Coaxial laudspeaker for perfect point source
  • Multiplex birch wood of different densities
  • Multi layered lacquer finish
  • Vented system with perfect matching to the listening room
  • Paper cone impregnated with Italian violin varnish
  • Cardas internal wire, also constructed in golden ratio proportions
  • Cardas terminals
  • Finest crossover components by Mundorf, Oil/Silver caps, foil coils, high grade MOX resistors
  • Designed for all amps
  • Can be placed close to walls and corners

Drive Units

  • 1 x 10” Paper cone, coated with violin varnish
  • 1 x 1” titanium compression driver, coaxial mounted

Frequency response

35 Hz (f-3 DB) to 20 kHz (f-3 DB)

Sensitivity

94 dB (2.83V/1m)

Impedance

8 Ohm (minimum 6 Ohm at 150Hz)

Dimensions

(with feet)

Height:

970 mm

Width:

470 mm

Depth:

360 mm

Weight

36.5 kg

Finishes Body

  • Iced Oak
  • Walnut
  • Others on request