STACORE ROLLER ANTI VIBRATION

Stacore new Roller anti-vibration platform. An intermediate platform, between the Intro and the pneumatic range. Based on roller bearings from Stacore's own design and manufacture.

This model features roller bearing as the main decoupling element. The top plate floats on three roller bearings. The massive base houses the bearing cups. The top plate and the bearings are the same as in our top model – STACORE ADVANCED. The heart of the platform – the roller bearings – are our in-house design, made of a deep hardened and mirror polished stainless steel. They available in two versions: Standard and cryogenically treated (Cryo-Max) for improved performance. The bearing balls are made of tungsten carbide. Our bearings are unique on the market due to their very high hardness, resulting in a high sensitivity to micro-vibrations. Thanks to that STACORE ROLLER platform offers an outstanding isolation performance in the horizontal plane down to few Hz. However, roller bearings are not easy to implement properly and require great attention to what they are housed in. Here we use our landmark solution, well proven in our other models. Both the base and the top plate have a sandwich construction, made of a natural stone – top quality Italian slate, and metal plates, bonded by a special viscoelastic glue. This results in an inert construction with great damping characteristics thanks to the Constrained Layer Damping (CLD) mechanism, giving the bearings the right environment to work their best.  The high mass of the platform also works as another natural damping mechanism. The sonic improvement offered by STACORE ROLLER is way ahead of that of INTRO with much better bass action and comes close to our higher models: A highly improved resolution, allowing you to hear your system at its best. Just like all our products, STACORE ROLLER is hand crafted in Poland to the highest aesthetical standards.

Following our modular philosophy, STACORE ROLLER platform can be either put flat, equipped with 3 or 4 spikes allowing for leveling [the same as in the Stacore Intro model], or incorporated into the Stacore Rack System.

The dimensions: 580(L)  x 480(W)  x 65(H) [mm]. Nett weight: 64kg.

Max load:

60kg  [standard bearings]
80kg  [Cryo-Max bearings]

Both larger and smaller custom sizes available on a special request.