The TONA T20/40 step-up transformer (SUT) is targeted enthusiasts and intended for moving-coil type cartridges. These traditionally provide a very low signal, and are difficult to amplify without noise. The transformer is a match for tube amplifiers, as the very high gain at 1:40 can be an advantage at low volume, and can also be used with a (tube) MM RIAA with a good dynamic range at high levels. At the same time, 1:20 with a more all-round 26dB gain instead of 32dB, is usable for most cartridges with low output.
Tona T 20/40 has two separate inputs with separate windings on the primary side.
Specifications
- • Two inputs 1:20 and 1:40 (26dB/32dB gain)
- • Comes with two quality RCA to XLR adapters for unbalanced operation
- • Including solid mahogany case, that can be wall mounted (certified wood)
- • Laminated soft iron case with 8 to 20 mm overall thickness
- • Wideband toroidal nanocrystalline transformers wound inhouse
- • Primary resistance 0.13 Ω (1:40)
- • Secondary resistance 35 Ω (1:40)
- • The transformers are induction matched in stereo pairs before and after winding
- • Low noise and wide frequency spectrum -3dB 5Hz-90kHz at 4Ω/10KΩ
- • Matched in stereo 0.1 dB 20Hz-20kHz
- • Litz primary winding
- • Connectors : Rhodium plated RCA connectors, gold plated XLR connectors
- • Stable heavy base accepts all XLR and RCA cables
- • Tested individually and are provided with measurements with serial number
- • CE and ROHS approved
- • 2 years warranty
- • Hand made in Aarhus, Denmark
Dimensions
- 125 x 150 x 50 mm 4.9″ x 5.9″ x 1.96″ without frame
- 159 x 184 x 50 mm 6.25″ x 7.25″ x 1.96″ with frame
- Total height: 63 mm 2.48″
- Weight: 4.6 Kg 10 lbs