AKu Audio Enarghia


AKu Audio Enarghia active 3-way stereo system with 4000 watts, 15Hz-40KHz, and true frequency response, designed for realistic dynamics and extremely low distortion, adaptable to virtually any room acoustics. 


The name "Enarghia" describes the purpose of the system, which is to provide a clear definition - of purity - coherence in thought. Infinite customization possibilities in colors and finishes. 


Technical Specifications


System

– Active 3-way, 5 chamber, floor stander with multi-layered proprietary body construction. Amplitude, time & phase aligned. Highly accurate linear phase crossovers.
– Asymmetric internal surfaces with embedded stiffeners in all directions.
– Minimal Vibration mdf composite design.

Driver Composition

– Bass section: two 12″ aluminum, high-excursion woofers paired with four 12″ aluminum passive radiators in two chambers.
– Midrange section: two ultra-accurate 4,7″ paper cone, neo magnet midrange units with under-hung motors and very wide linear frequency response.
– Treble section: one 1,34″ beryllium dome, neo motor high-excursion tweeter with high power handling, low distortion & cross capability.
null

System preamp/Crossover

DSP/Room EQ

– One DEQX digital system processor per pair with four programs. (Maximally Flat, Bass Contour, Party Mode, free slot for personalization)
– Five Digital inputs: 1.toslink(optical) 2.s/pdif(BNC) 3.s/pdif(RCA) 4.AES/EBU(XLR) 5.USBaudio(acts as a computer soundcard)
– Two Analog inputs: 1. Unbalanced stereo (RCA) 2. Balanced stereo (XLR)
– Six balanced analog outputs (XLR)
– Three stereo digital outputs (BNC) for optionally using outboard D/A converters
– Trigger out
– Linear Phase crossovers up to 300dB/Oct.
– THD: 0.0008%
– RoomEQ with 10 real-time fully parametric eq points (measurement mic included)
– Ethernet connectivity, supporting DLNA & Roon
– Touch screen control & remote

Frequency Response

– 12Hz – 40000Hz (in room @ +-3dB)
– 25Hz – 22000Hz @ +-0.5dB accuracy

SPL

– 120dB

Stands

– Four 360deg. Industrial Alu-rubber wheels

Amplification

– One custom Eight Hypex Ncore Channel amplifier
– Fully Balanced operation
– No switches in signal path
– Furutech Rhodium 16A power inlet
– Bass: 1000Watt
– Midrange: 500Watt
– Treble: 250Watt
– Frequency Response: 10Hz-50KHz
– SNR: 118dB
– Distortion (THD+N): 0.006% @ half power
– Global Mains Voltage compatibility (100-240VAC)
– Efficiency: 92%
– Max Power Consumption: 3600W
– Speaker Matching Color
– Neutrik XLR balanced inputs
– Neutrik Speakon 8pole output

Dimensions

– Loudspeakers
H:1825mm W:400mm D:610mm
H:71.80in W:15.75in D:24in
– Amplifier
H:160mm W:570mm D:400mm
H:6.30in W:22.45in D:15.75in
– Processor
H:106mm W:430mm D:300mm
H:4.17in W:16.93in D:11.81in

Weight

– Loudspeaker: 130kg / 286,6lbs each
– Amplifier: 15kg / 33lbs
– Processor: 5kg / 11lbs