NEW STAND DESIGN
Details create the bigger picture..
We have given many thought to the details of this ‘new’ model. Taking everything into account and making no compromise. When looking at a loudspeaker, we see drivers, tweeters, crossovers, cabling but another important aspect is the place where the loudspeakers make contact with the surface – the stand.
We’ve done a lot of research to find a way to minimize the contact surface in order to improve the clarity in the music representation. On this picture you see the details of the stand. However, the most important part is on the inside. Four Tungsten balls 8mm that keep the loudspeaker at a minimum contact surface.
DIAMOND CONCAVE TWEETER
Without a doubt the quality is guaranteed by using a Diamond tweeter as a standard in the Exquisite Collection. These high-frequency drivers are true technological wonders. The tweeters have a diamond cone which have been realised by the so called CVD process. With this process incredible stiffness is reached with a minimum of thickness of only 50 μm. Notice a human hair is in the range of 17 to 180 μm. The cone is the most essential part of the tweeter and because this cone is made of Diamond the tweeter is capable to create impressively pure high frequencies.
SPECIFICATIONS
- TypeEXQ-MD-3.0
- System4-way
- RMS power250 Watt
- Program power400 Watt
- Frequency range23 Hz – 90 kHz
- Nominal impedance4 Ohm
- Efficiency 2.83V/1m90 dB
- Maximum SPL113 dB
DRIVERS
- High-frequency1x 1″ Diamond concave tweeter
- Mid-frequency1x 7″ Kharma Omega-7 driver
- Low-frequency2x 8″ Nomex Kevlar driver
DIMENSIONS
- Height1030 mm / 40.60 inch
- Width390 mm / 15.35 inch
- Depth645 mm / 25.47 inch