Totaldac writes: “The d120 is the very high end speaker of Totaldac, made to develop the electronics and to demo a full system. It will be used at the Munich High End show in May 2024.”
This speakers are made of pure solid wood (from France), with oil finish for the cabinet, the horn is made of solid wood as well, the compression driver back chamber is made of solid wood as well and even more exceptional the driver frame is also made of wood for an even better sound.
It uses the same drivers and same crossover as the d110 but the cabinet is much more complex, internally and externally.
The design is curved in 3D for a better response to the acoustic waves, the inside is completly covered with wooden diffusors, the cabinet is much thicker with no parallel wall, more reinforced and is visually more appealing.
The sound is ultra real with this speaker, making you simply enjoy all musics, forgetting the system.
specifications:
-98dB @ 1m @ 2.83V even in bass thanks to two 12inch drivers
-2.5way: both 12inch drivers are producing bass but only the top driver is producing midrange as well
-bass cut-off: 25Hz at -6dB in room
-8ohm average impedance
-constant directivity horn used only above 3KHz, made of solid wood
-no toe-in is necessary, installing the speakers straight towards the rear wall is recommended
-compression driver back chamber made of solid wood
-equally resolving from top to bottom
-most of the sound is coming from the top of the speaker, giving it a bookshelf speaker coherency
-Neodymium bass driver with very high force
-custom made ultra fast bass/mid driver based on a wooden chassis
-very extended treble 1 inch compression driver with organic dome, up to 24KHz
-crossover made of air coils and Claritycap PUR
-point to point wiring crossover, no PCB trace is used, only the component legs are used
-inductor for the bass made of 5mm2 copper wire
-crossover isolated in its own wooden enclosure
-ready for bass active crossover
-Mundorf binding posts for any kind of banana and spade cables
-cabinet and internal diffusors made of solid wood
-made in France
-width: 374mm incl the base
-depth: 605mm incl the base
-height: 1265mm incl feet
-weight: 68kg
