Divine Acoustics Bellatrix is a 2.5-way, 3-speaker system. “The woofer and mid-woofer work in a joined volume constituted by a multi-chamber bass-reflex / TQWT system with ventilation at the bottom side. The multilayer enclosure is designed in the CRC design technology,  internally reinforced with a grating made of plywood and steel. A separate chamber for the tweeter has been designed. Mineral mats were used to dampen the enclosure precisely, so it was unnecessary to use other loose dampening materials. Bellatrix stands on a one-piece carbon steel pedestal integrated with the enclosure, equipped with our Kepler vibrations absorbing feet.”

Crossover is the most complex and advanced part of Bellatrix speakers. It has its own housing permanently attached to the main body of the speaker. During the design and construction of the crossover, SGP, ESM and RFpath technologies were used. All parts are mounted using the point-to-point method, on both sides of the multi-hole plate. The Bellatrix crossover consists of 51 top-quality components: copper Miflex KFPM-1, aluminum Jantzen Audio Alumen, foil Miflex MKP-10, Jantzen Audio Z-Superior and Z-Standard capacitors; Superes metallized non-inductive resistors, precision carbon resistors in correction circuits and cotton-insulated OFC coils. Solder connections are lead-free. The full repeatability of subsequent copies is ensured by the multi-stage measurement control of individual elements and all of connections.

Filter characteristics:

– woofer: 1st order slope with coil inductance compensation, cut-off frequency: ~ 250Hz;

– mid-woofer: 1st order slope with coil inductance compensation, precise baffle-step compensation, elliptical correction of diaphragm break-up resonances, cut-off frequency: ~ 2900Hz;

– tweeter: twin-path 2nd order slope with coil inductance compensation, cut-off frequency: ~ 2900Hz;

– internal cabling: Divine Acoustics Halley;

– connection: Divine Acoustics – Single uncoated copper binding posts, FDC compliant that accept Banana Connectors (BFA) and spades.

Technical Data:

  • Impedance: 4 Ohms
  • Efficiency: 88 dB
  • Frequency response: 35 Hz-40 kHz
  • Recommended listening room area: 16-40 m2
  • Recommender amplifier power: 10-160 W
  • Speaker to amplifier accommodation period ~48 hours
  • Capacitors burn-in time: ~500 hours
  • Net weight: 29 kg
  • Shipping weight: 2x 34 kg
  • Packaging dimensions (cm): 2x 132x46x46
  • Design: 2.5 way, bass-reflex/TQWT
  • Woofer / midwoofer: 2x 7” ETON Orchestra
  • Tweeter: 1x 1” Scan-Speak Illuminator
  • Internal wiring: Divine Acoustics Halley
  • Binding posts: Divine Acoustics, single, pure copper
  • Floor separation: Divine Acoustics Kepler