Falcon 2024 Limited Edition speakers features cabinet with a 9 mm thin wall BBC specification selected grade Baltic Birch ply sealed back cabinet manufactured in Italy, c. 1975 vintage Tygan grille cloth woven in Yorkshire England, and finished in natural English Burr Elm veneer.
Capacitors Falcon specification UK Manufactured Polycarbonate capacitors. Polycarbonate film capacitors are widely held to provide the best results possible giving greater detail, transparency and an ultra-low noise floor. The film has been out of production for over 25 years, so this is a rare opportunity to hear what
the BBC intended the LS3/5A to sound like.
Inductors Falcon UK Manufactured BBC R&D Spec transformer inductors. These are about double the size of standard production inductors generally available, and provide better saturation characteristics, lower distortion and improved bass response.
Resistors Ohmite NI Audio Gold resistors. USA made especially designed for high-end loudspeaker and amplifier applications. These high-quality wound resistors have been carefully engineered with non-magnetic materials to eliminate the effects of stray magnetic fields on performance, resulting in simplified shielding requirements and improved sound quality.
PCB Gold plated Arlon25N multi-layer 1.6mm heavyweight PCB. Arlon 25N is renowned for ultra low dielectric loss and maximum signal stability. Rarely seen in audio equipment due to cost, and used historically in ultra high-end pre-amplifiers and phono stages, the properties of Arlon 25N create maximum sonic accuracy and lowest possible noise floor for exceptional clarity. The addition of gold plated 2oz tracking creates a PCB with clearly audible sonic benefits particularly in the midrange.
PCB PINS Gold plated machine-turned PCB pins manufactured in Japan, for improved signal path.
INTERNAL WIRING TPE insulated fine multi strand oxygen free copper wiring.
BINDING POST Falcon Rose Gold plated binding posts.
PRESENTATION CASE Italian manufactured Burnished Leather wheeled Pilot-style presentation case with Falcon Acoustics logo. Fully lined interior. Internal removable protection section allows the case to be used as a weekend/pilots case for travelling.
® B110 and T27 are Registered Trade Marks registered to Falcon Acoustics Ltd
- System type: Two-way infinite baffle (sealed box, sealed back)
- Frequency response : 70Hz – 20kHz ± 3dB
- Sensitivity: 83dB for 2.83V @1m Nominal impedance: 15 ohm
- Bass/Midrange driver: 138mm Falcon Acoustics B110 – graded & matched by Clio.
- Tweeter: 19mm Falcon Acoustics T27 – graded & matched by Clio.
- Crossover: Falcon Acoustics FL6/23 Platinum Edition, graded/precision measured and matched compo-
- nents throughout. Crossover frequency 3Khz.
- Cabinet: Selected hand-graded Baltic Birch Ply, Beech battens, critically internally damped
- Finish—Real English Elm Burr wood veneer, vintage Tygan Cloth grilles
- Dimensions: 305mm H x 190mm W x 165mm D. Weight 5.40 kgs each
- 12.00″ H x 7.48″ W x 6.6″ D. Weight: 11.9 lbs. each
- Case dimensions: 420mm L x 410mm W x 420mm H.
- Shipping dimensions (est): 610mm x 410mm x 540mm GWT 20.5 Kgs
- Double boxed with foam protection sections.